+49 (0) 6083 95989-0
Mytronic GmbH
Riedelbach - Technology Park
In den Ensterwiesen 7
61276 Weilrod
Dental medical instrument hoses are used to deliver media such as air and/or water and to provide electrical connections between the instrument and the treatment unit. Air, water and electrical power are all essential for the operation of medical instruments. These hoses are intended solely for professional applications, e.g. for use in dental practices or the cosmetics area.
The Mytronic product range includes hoses for motors, syringes and dental scalers, as well as pre-configured couplings for all standard treatment units from renowned German and international manufacturers. The hoses are available with or without light and/or water regulation. All instrument hoses comply with Medical Device Class I.
How do I configure my customised hose?
Choose the desired hose that will fit your unit-site connector. Mytronic supplies all common instrument-side and unit-side connectors. If you should not find the desired hose, please contact us for help or advice.
A hose is made up of 5 components:
Order example 743.C01.1800.01
| Article type | Instrument-side connector sleeve | Unit-side hose end | Outer hose in mm |
Outer hose colour |
| 743 | C | 01 | 1800 | 01 |
| Turbine hose 4-hole with light | Standard sleeve | open ends | 1800 mm | black RAL9011 |
 |
 |
 |
How to determine the length of the hose:
For hoses with unit side connector: from bend (connector/sleeve widens). The standard length of the hose is 1350 mm.
For hoses with open ends: visible outer hose length. The standard length is 1800 mm; the additional length of the inner tubes/wires 500 mm.
For configuring a hose please select the relevant item. You will then be transferred to the next step where you can configure the hose to meet your specific requirements.
If you have any questions about the composition of your hose, please do not hesitate to call us!
