Product description

Servo-Valve SV1.1

Illustration item shows No. SV1.1 (351.501.1)

The servo valve is used to regulate water and air. Regulation is subject to the applied control signal and can be can be found in the corresponding data sheet.

The valve should be used only as a regulation and not as a shut-off of the media.

• Small size
• Standard PWM control
• Connection: JR1 servo socket
• Maximum pressure 6 Bar

Intended use

Only use with air and water as well as with flexible hoses. Flexible connection hoses and hose fittings available as options. Recommended internal diameter of hose: 1.5 mm.

The power supply is 4.5 V to 8.5 V. Current consumption is approx. 10 mA when idle and approx. 50 – 250 mA in operation. Please note that brief current peaks of up to 1 A may occur.

The control signal should be switched off after the control angle has been reached. A servo valve that is permanently in control has a direct influence on the service life of the motor.